Just downloaded the latest 3.5 version of Uniform Server as I want to use it to run a cmsmadesimple installation.

 

Having used Uniform Server many times before it's usually pretty straightforward... however on downloading the latest version and clicking Server_Start.bat it doesn't map the W: drive it tries to bring up the apanel but just says page cannot be found.

 

Any help would be appreiciated.

 

Thanks

Craig

I have seen this several times before and believe it to be a race condition. Depending what’s running on your machine apanel is requested before the servers are running.

 

If the server’s are not running the browsers cannot find the page wait a while and click refresh page. If that is not the problem try restarting your PC (Always best to start from a known working point) and try again.

 

Should that fail to remedy the problem take a look at the following page it may be of some help:

 

http://center.uniformserver.com/home_webse...l_problems.html

 

The following may also be of use! At the top of this page:

http://center.uniformserver.com/us_35_oily...script.html#top

 

You will find this file project_uc_server_control_2.exe download and extract, it contains a test start-up script named uc_server_control_2.exe run this to start the servers. It contains some diagnostics that can be viewed when certain problems are encountered. I tried to resolve the race condition however occasionally I noticed even with this it still occurs. Ho well!

 

All the best

Ric