Jump to content
The Uniform Server Community
hawkesley

Unitray does not show on Windows 2003 IIS R2

Recommended Posts

I want to upgrade from Apollo 3.2 to R7 principally to get php upgraded.

I have loaded the download and turned off the Appollo uniserver, but when I hit the start exe I get the message Unitray created , but it is not showing. Nothing in the logs so I guess the servers never started.

How should I go about sorting this please.

Share this post


Link to post
Share on other sites

Unitray "should" appear in the System Tray, with the number of server(s) running, something like a white number on a blue box ...

 

Besides, there are two folders to play with yourself, "a_diagnostic" and "alternative_control" ...

 

 

 

I want to upgrade from Apollo 3.2 to R7 principally to get php upgraded.

I have loaded the download and turned off the Appollo uniserver, but when I hit the start exe I get the message Unitray created , but it is not showing. Nothing in the logs so I guess the servers never started.

How should I go about sorting this please.

Share this post


Link to post
Share on other sites

Unitray "should" appear in the System Tray, with the number of server(s) running, something like a white number on a blue box ...

 

Besides, there are two folders to play with yourself, "a_diagnostic" and "alternative_control" ...

 

Thanks. As I said I don't see the unitray in the system tray. What do these 2 folders do?

Share this post


Link to post
Share on other sites

It might be a nice idea to run the scripts under that two folders from within a CMD Prompt ...

 

Just read and you may see that "a_diagnostic" is the folder for diagnostic purpose:

 

a_diagnostic/1_port_check.bat
a_diagnostic/2_Apache_program.bat
a_diagnostic/3_Start_MySQL_program.bat
a_diagnostic/4_Stop_MySQL_program.bat
a_diagnostic/5_Start_Services.bat
a_diagnostic/6_Stop_Services.bat
a_diagnostic/server_status.bat

 

and "alternative_control" for alternative control of services:

 

alternative_control/remove_drive_w.bat
alternative_control/run_on_drive_w.bat
alternative_control/Service_Install_Run.bat
alternative_control/Service_Stop_Uninstall.bat
alternative_control/Start_2.exe
alternative_control/Start_Cron.bat
alternative_control/Start_MySQL_Console.bat
alternative_control/Start_Server.bat
alternative_control/Start_UniTray.bat
alternative_control/Stop_Cron.bat
alternative_control/Stop_Server.bat
alternative_control/Stop_UniTray.bat

 

Unless you put your clone under a path with space (U0020) ...

 

 

 

 

Thanks. As I said I don't see the unitray in the system tray. What do these 2 folders do?

Share this post


Link to post
Share on other sites

I want to upgrade from Apollo 3.2 to R7 principally to get php upgraded.

 

How should I go about sorting this please.

 

First off, is IIS running? Are you using that in lieu of Apache? In any case, be sure to check the ports first.

Regards,

BobS

Share this post


Link to post
Share on other sites

First off, is IIS running? Are you using that in lieu of Apache? In any case, be sure to check the ports first.

Regards,

BobS

Sorry to be so long in replying and thanks for your reply.

IIS is running and I am not using it in lieu of Apache.

I can run 3.3 with no problem.

I turn that off and then try R&. No Tray,but if I then restart I get the message that an instance of Apache is already running.

How do I check the ports?

Share this post


Link to post
Share on other sites

Let's go back even further; what version of Windows are you on? WS2003 or WinXP? I assume you're not on later versions, but I don't know that, and it makes a big difference. Also, which revision of version 7? I have been using 7.0.0, but this may also be a problem source for you.

I can run 3.3 with no problem.

That's likely because there's no conflict with port 80. I don't recall enough about old 3.3 to remember just why. B)

 

I turn that off and then try R7. No Tray, but if I then restart I get the message that an instance of Apache is already running.

So the first question is what do you mean by "turn off" and "restart"? These terms aren't clear enough to explain just exactly what is happening. I assume you mean stop all processes from 3.3 and remove disc W:,

so that there are no leftover remnants.

That means when you start version 7, it should create the icon This may be blocked by security restrictions. In any case if you can't see the icon, exactly how are you starting the servers?

Then you say "restart," but don't say what exactly you're restarting, or how.

Also, have you used task manager or process explorer to check on what is running? What are the results?

 

How do I check the ports?

Use the a_diagnostic/server_status.bat, which will show you the port status, plus much more.

 

Regards,

BobS

Share this post


Link to post
Share on other sites

Let's go back even further; what version of Windows are you on? WS2003 or WinXP? I assume you're not on later versions, but I don't know that, and it makes a big difference. Also, which revision of version 7? I have been using 7.0.0, but this may also be a problem source for you.

 

That's likely because there's no conflict with port 80. I don't recall enough about old 3.3 to remember just why. B)

So the first question is what do you mean by "turn off" and "restart"? These terms aren't clear enough to explain just exactly what is happening. I assume you mean stop all processes from 3.3 and remove disc W:,

so that there are no leftover remnants.

That means when you start version 7, it should create the icon This may be blocked by security restrictions. In any case if you can't see the icon, exactly how are you starting the servers?

Then you say "restart," but don't say what exactly you're restarting, or how.

Also, have you used task manager or process explorer to check on what is running? What are the results?

Use the a_diagnostic/server_status.bat, which will show you the port status, plus much more.

 

Regards,

BobS

 

BobS

Thanks for your reply.

I will clarify.

I am running Microsoft Windows Server 2003 R2 on an IBM server.

 

I have version 7.0.0

Regarding this I noticed this in the change log for this release,

7.0.0 - PHP updated to 5.3.6

- Server components updated from VC6 to VC9

Note - To run this version of Uniform Server the Visual C++ 2008 redistributable package is required.

It can be downloaded from:

http://www.microsoft.com/downloads/en/deta...0D-3802B2AF5FC2

The process I have gone through is to close version 3,3 by closing mysql in the admin panel and running stop.bat from the folder.

I then open the R7 folder and click on Statr.exe

An alert box says the systems tray has been created but it is not there.

Using the diagnostic programs eg Apache it says Apache is not running.

I am operating the server remotely using my IMac and I cant find how to get the task manager running.

I have copied the port check results for both 3.3 and R7

as below

With 3.3 running

 

 

 

Active Connections

 

Proto Local Address Foreign Address State

TCP 0.0.0.0:21 0.0.0.0:0 LISTENING

TCP 0.0.0.0:80 0.0.0.0:0 LISTENING

TCP 0.0.0.0:135 0.0.0.0:0 LISTENING

TCP 0.0.0.0:445 0.0.0.0:0 LISTENING

TCP 0.0.0.0:1025 0.0.0.0:0 LISTENING

TCP 0.0.0.0:3306 0.0.0.0:0 LISTENING

TCP 0.0.0.0:33891 0.0.0.0:0 LISTENING

TCP 10.0.0.229:135 10.0.0.229:1610 ESTABLISHED

TCP 10.0.0.229:139 0.0.0.0:0 LISTENING

TCP 10.0.0.229:1610 10.0.0.229:135 ESTABLISHED

TCP 10.0.0.229:1629 74.125.230.140:80 ESTABLISHED

TCP 10.0.0.229:1630 74.125.79.100:80 ESTABLISHED

TCP 10.0.0.229:1632 10.0.0.229:139 TIME_WAIT

TCP 10.0.0.229:33891 109.145.126.12:49168 ESTABLISHED

TCP 127.0.0.1:1026 0.0.0.0:0 LISTENING

TCP 127.0.0.1:1027 127.0.0.1:14147 ESTABLISHED

TCP 127.0.0.1:1028 127.0.0.1:1029 ESTABLISHED

TCP 127.0.0.1:1029 127.0.0.1:1028 ESTABLISHED

TCP 127.0.0.1:1030 127.0.0.1:1031 ESTABLISHED

TCP 127.0.0.1:1031 127.0.0.1:1030 ESTABLISHED

TCP 127.0.0.1:1631 127.0.0.1:445 TIME_WAIT

TCP 127.0.0.1:1633 127.0.0.1:14147 ESTABLISHED

TCP 127.0.0.1:14147 0.0.0.0:0 LISTENING

TCP 127.0.0.1:14147 127.0.0.1:1027 ESTABLISHED

TCP 127.0.0.1:14147 127.0.0.1:1633 ESTABLISHED

 

This test checks ports are free to use.

Scan down Local Address column

Look for any address ending with the following:

 

:80 (Apache standard port)

:443 (Apache standard SLL port)

:3306 (MySQL standard port)

 

Any entries found will prevent Uniform Server running

 

Disable any program using the above ports.

Generally Skype and IIS occupy port 80. Move Skype to another port, stop IIS se

rver.

 

Rerun test to ensure the ports are free (not listed)

 

Note 1: Press any key to rerun.

Note 2: To close this window click top right cross

 

Press any key to continue . . .

With Nano started from the folder.

 

Active Connections

 

Proto Local Address Foreign Address State

TCP 0.0.0.0:21 0.0.0.0:0 LISTENING

TCP 0.0.0.0:135 0.0.0.0:0 LISTENING

TCP 0.0.0.0:445 0.0.0.0:0 LISTENING

TCP 0.0.0.0:1025 0.0.0.0:0 LISTENING

TCP 0.0.0.0:33891 0.0.0.0:0 LISTENING

TCP 10.0.0.229:135 10.0.0.229:1610 ESTABLISHED

TCP 10.0.0.229:139 0.0.0.0:0 LISTENING

TCP 10.0.0.229:1610 10.0.0.229:135 ESTABLISHED

TCP 10.0.0.229:33891 86.148.15.13:49366 ESTABLISHED

TCP 127.0.0.1:1026 0.0.0.0:0 LISTENING

TCP 127.0.0.1:1027 127.0.0.1:14147 ESTABLISHED

TCP 127.0.0.1:1028 127.0.0.1:1029 ESTABLISHED

TCP 127.0.0.1:1029 127.0.0.1:1028 ESTABLISHED

TCP 127.0.0.1:1030 127.0.0.1:1031 ESTABLISHED

TCP 127.0.0.1:1031 127.0.0.1:1030 ESTABLISHED

TCP 127.0.0.1:14147 0.0.0.0:0 LISTENING

TCP 127.0.0.1:14147 127.0.0.1:1027 ESTABLISHED

 

This test checks ports are free to use.

Scan down Local Address column

Look for any address ending with the following:

 

:80 (Apache standard port)

:443 (Apache standard SLL port)

:3306 (MySQL standard port)

 

Any entries found will prevent Uniform Server running

 

Disable any program using the above ports.

Generally Skype and IIS occupy port 80. Move Skype to another port, stop IIS se

rver.

 

Rerun test to ensure the ports are free (not listed)

 

Note 1: Press any key to rerun.

Note 2: To close this window click top right cross

 

Press any key to continue . . .

 

I hope this helps and look forward to hearing from you.

Thanks

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...